It is impossible to dispute the significance of high-quality vacuum grease in achieving a satisfactory vacuum level, just as high-quality vacuum pump oil is required. High vacuum silicone greases have many benefits and few disadvantages for industrial vacuum systems. The grease, which is composed primarily of silicone high vacuum fluid, has a milky white hue and a significantly firmer consistency than regular greases. 

It’s silicone grease that isn’t melted at high vacuum. It is a great chemical-resistant stop-cock grease that is heat stable and keeps its consistency over a broad temperature range. Because of its strong adhesiveness and water resistance, it can be used in a variety of industrial settings. It has a 10-6 Torr vacuum sensitivity.

Benefits include: 

• Lower leak rates from O rings and other vacuum connections are caused by vacuum grease. For this reason, it’s employed not only as a lubricant but also as a joint sealant in vacuum systems. 

• Resistant to dampness and water. 

• Corrosion inhibitor; 

• Retains its solid state, meaning it doesn’t melt or evaporate in extremely hot or cold temperatures. Supervac’s SV-G9-Silicone High Vacuum grease is much superior to Apiezon hydrocarbon greases in that it can tolerate temperatures ranging from -25°C to 250°C. 

• Preserves the rubber components by preventing heat-induced swelling or softening. 

It’s not runny and doesn’t contaminate the vacuum system because it’s thicker than regular lubricants; therefore, it’s ideal for ultra high vacuum systems. For vacuums up to 10-9 Torr, Supervac’s SV-G9-silicone is utilized. Its extremely low vapor pressure prevents oil vapor from backstreaming. 

Apart from all these benefits, Supervac’s SV-G9-Silicone has an additional benefit: its cost is quite competitive. This implies that the consumer won’t have to break the bank to obtain a product of the highest caliber. 

Of course! A specialist lubricant used in vacuum and pressure systems is silicone high vacuum grease. Below are some salient details regarding it: 

Uses: 

• Lubrication and Sealing: It lubricates and seals vacuum systems, gaskets, O-rings, bearings, and valves.

• Chemical Processing Equipment: Applied in fire extinguisher valves, flow meter bearings, control valves, ceramic plug cocks, and plug valves. 

• Optics: Lubricates O-rings in telescopes and binoculars to keep fragile lenses from fogging up. 

• Lubrication of Rubber and Elastomers: Appropriate for high-temperature synthetic rubber gaskets and seals 

• Vacuum Pumps: Suggested for systems with vacuum pressures up to 10^-6 mbar.